A good lighting design can bring a series of beneficial effects that are gaining around, various lighting fixtures have their different feature for different applications, such as penal light creating a uniform lighting level for office rooms, cabinet light concentrated illumination the cooking work, and LED bulkhead can withstand physical abuse and harsh conditions with impact-resistant materials, etc.
Bedroom is a primary place where you start and end each day, it deserves some special attention to lighting it properly and taking its lighting into a next level. In a well-designed sleeping room, each mounted lighting tool plays their different role.
For example, the downlight is used as general lighting for the bedroom, LED trip-around light as ambiance lighting for the bedroom, and the luminaries on the desk are for reading or something else.
Why need LED bed lights?
When you suddenly wake up with urine at midnight, the darkness may prevent you from moving, but a suddenly bright light would get you into a startle response, probably leading you to headaches or eye strain, especially if you are sensitive to light.
What’s worse, the sudden disruption of sleep could affect your mood and make you feel irritable or groggy. For that situation, low-wattages LED bed light is necessary to install near the bed, it is a kind of lamp installed near the bed's right side or left side as an assistant lighting for the room.
Low-wattage LED bed lights dim the lights gradually to allow your eyes to adjust when you get up suddenly at midnight and are ready to do something. In addition, you can read a piece of time before sleeping under the bed light while other lights are off.
Key features of Bed light
LED bed lights have a long lifespan and energy efficiency, which as ambiance lighting, aims to provide soft, gentle light for reading, getting up, or checking the time.
How many watts of LED bed light is suitable?
In a general rule, there use approximately 1.5--2.5 watts per square foot as a general guideline for bedrooms, and there are total lumen may range from 2000 -- 4000 lumens in a 30 square meter bedroom, so the sum of wattages probably not higher than 55 watts.
Further subdivide each LED light fixture in the room, 3-5 watts are suitable for excessive light and movement, while 8-10 watts can light up the room basically, and 18-20w can brighten the room adequately.
Usually, LED bedside lamps are designed of 3-10 watts, around 300 lumens is suitable for midnight get up without eye strain, and around 400 - 450 lumens is suitable for reading.
Recommended 3-5W LED bedside lamp
3-5 watt LED bedside lamp is well designed for layer lighting in the ambiance function, it creates a soft, warm glow that can help set a relaxing atmosphere, ideal for winding down before sleep. Besides, the gentle illumination to navigate the room at night without disturbing your sleep cycle or waking others.
Choose your bedside lamps
LED bedside lamps are a staple of most bedrooms, may you put one on your nightstand for a good reason? What styles of bedside lamps will you choose?
Ideally, a bedroom LED bedside lamp should blend into its surroundings and add to the detail. Modern elements and function features are the two main factors considered by most people. Below are the two recommended UPSHINE bedside products.
UPSHINE WL136 and WL127 are the typical hot sale bedside light
WL136: This bedside light is inspired by a small mushroom. The lamp head can rotate 330 degrees horizontally and 90 degrees vertically, allowing users to easily adjust the lighting angle. It is primarily used for auxiliary lighting: when the lamp head is directed downward, it serves as a reading light; when directed upward, it functions as a night light, with the light reflecting through the lampshade to create a softer glow.
WL127: This bedside lamp features a round or square base and a short gyro neck or gooseneck design, available in an AC switch version. It utilizes an SMD LED chip with a special lens to provide a comfortable visual experience. Despite its compact size, it includes an internal flicker-free driver and an AL6063 aluminum housing for excellent thermal management, ensuring a long lifespan.
With both high efficiency and long lifespans 3-watt bedside lamp are good for transitioning between darkness and light. They are widely used in hotels, home bedrooms, or installed in restaurants for decorative light.
