“Brightness” play a vital role in our daily activities. In the accident times, the ancestors get up early when the sun just up to the sky and start their busy day, while they eating at dusk and going to bed after nightfall. As the candle comes out, our ancestors doing works longer than before, and they went to bed late. So from the old days can draw a conclusion that brightness is important for us, unlike we can do nothing in the darkness cause our version gets blind. What as the same today. With the LED turned out, the modern people play more attention to the lighting effect and its functions. But no matter how excellent the performance of the lighting fixtures, some of them may get wrong in accidents. They may meet some problems following:
- Lamp flickering
- Part of the lamp bead is not bright
- One of the red colors is not working
- The whole lamp is not bright
How To Figure Out And Deal With Those Problems?
If the lamp flickering or not working, we should check if the plug connects well or if the cable lose, try toggling the switch on and off to check if the lamp goes well or not continuously. Then change other new one to check if the current is normal, if the new one fails, the problem may be from the electrical circuit problem.
In part of the lamp bead is not bright or one of the red colors is not working. The first step is to confirm the voltage and current rating of the power supplier if compatible with LED strip. Second, you can confirm if the power supply is working correctly. Third, checking and isolating other accessories on the same circuit, and see if there any visible loose connections or any visible signs of short circuits
Refer to one of the red colors is not working, just use the similar solution ways as before, checking the cables between the controller and the strip, try tightening the screw on DC adapters, and re-inserting LED strips into solderless connectors
Generally, most LED strips not working well may due to serval problems, they are power problems, LED strip or connector and controller damage, and environmental problems. Addressing the relevant pain points to solve the problem is OK.
