In the smart home, there are many smart devices like the intelligent mop, smart mattress, electric curtain, smart lighting, etc. Most smart devices have a smart system, smart lighting is not the expectation.
As is known to all, smart lighting systems through different ways to control the lights, such as the light sensor control, wireless through, App control, and remote sensor control, etc. As for the remote sensor control, it mainly depends on the single-chip microcomputer controlling the guiding angle of SCR, and the LED lamp is controlled by light sensing and infrared ray. Through comprehensive control and intelligent judgment, the intelligent control of LED lights is realized.
In ten years ago, the base microwave sensor inductions with use of the functions S type and SS type just turn on or turn off are commonly used, but as the times goes by, the microwave induction of S3 type come out with stand-by functions. S4 types, S5 types, and S6 types come out in the following years with mater-slave functions. In that the ITO system faster develops, UPSHINE based on the first couple of types of microwave sensor, engage in reaching a new kind of MS-07R induction.
UPSHINE MS-07R
The new generation lighting remote control MS-07R is more functional and easy to use than before products, it not merely for automatic switch induction light, as well as standy-by dimming level function, stand-by period function, mater-slave, hold time, detection area, remote control, and daylight sensor, etc.
MS-07R has 6 DIP switches, each switch corresponding to the relevant function.
- Open the first DIP for the deletion area 100% brightening lighting, if off, there will be 50% brightness lighting.
- Open the second DIP and the third DIP are used for hold time setting when someone passes by.
- Open the fourth DIP for the daylight sensor, 100lux when lights are on, and 30 lux when lights are off.
- The fixed DIP is for stand-by DIM level, which means after someone passes by, there is still 100% lumen lighting when on, if not, there is 20% lux.
- The sixth DIP is a stand-by period, the left time can be set from 2.5 to 11 minutes when the DIP turns on.
Detection Area
What Is The Feature Function Of Ms-07R Microwave Induction?
- Longer sensing distance and wider angle than infrared sensing modules, no dead zone, lens and lens aging problems
- No influence by temperature, humidity, airflow, dust, noise, light and dark, strong anti-interference ability
- Can penetrate acrylic, glass, and thin non-metallic materials
- Built-in MCU, embedded with multiple digital filtering algorithms, with higher immunity
- Ultra-small planar antenna to solve the problem of dark areas in ultra-thin lamps
- Planar 5.8G microwave antenna technology, solving the problem of no induction under the light of a pin-like microwave induction antenna.
- Adopt 3-segment microwave sensing technology, users can select their own sensing status by the dialer
- Batch products ensure compliance with RED and TUV certification requirements.
- The product is divided into a dip-code model and a dip-code external model, which makes installation and use more convenient.
- Parameters can be set by remote control or by dialing a code.
- The sensor can be switched on and off using the remote control (as with the S5 sensor).
What is the parameter of the induction?
1)The appearance of the S7R remote control is exactly the same as the S5 remote control.
2) The key code of the S7R remote control is exactly the same as that of the S5 remote control, which can be universal.
3) S7R model has 22 keys, the S5 model has 19 keys, and more functions.
