Input |
Input Power |
5-10W |
12-23W |
25-45W |
Input Voltage |
180-265V |
Rated Input Voltage(V) |
200-240V |
Frequency |
50/60Hz |
Input Current |
≤0.06A |
≤0.13A |
≤0.3A |
Rated Input Current |
≤0.04A |
≤0.1A |
≤0.25A |
Power Factor (Typ) |
0.9 |
Total Harmonic Distortion(Thd) |
<20% @230V |
Efficiency (Typ) |
≥72% |
≥82% |
≥86% |
Inrush Current (Typ.) |
27A/10.6uS |
24.8A/20.6uS |
34A/24.6uS |
Max Circuit Breaker |
Please refer to" Circuit breaker Specification" |
Leakage Current |
<0.5mA/240V |
No Load Wattage |
<0.5w @230V |
Output |
Output Voltage Range |
28-40V |
Rated Output Current |
100-250mA |
300-550mA |
600-1050mA |
Line Regulation |
±5% |
Open Circuit Voltage (Max) |
50V |
Setup Time(Note1) |
<1s @230V |
Flickering Index(IEEEStd 1789) |
3%(NO RISK) |
6%(NO RISK) |
6 %(NO RISK) |
Protection |
Short Circuit Protection |
Constant current limiting, recovers automatically after fault condition is removed |
Over Voltage Protection |
Shut down o/p voltage |
Over Temperature Protection |
Shut down o/p voltage, recovers automatically after temperature goes down |
Environment |
Ambient temperature range ta |
-20…+50 °C |
Maximum case temperature tc |
85°C (Measured on tc point indicated of the product label, tc not exceeded) |
Operating temperature |
-20…+45 °C |
Storage temperature/humidity |
-25…+85 °C; 5-95% RH |
Relative humidity |
5…85% |
Environmental rating |
Indoor |
IP rating |
IP20 |
Lifetime |
Lifetime >30,000H @45°C |
Safety &EMC |
Safety Standards |
IEC/EN61347-1, IEC/EN61347-2-13, IEC/EN62384 independent,GB19510.14,GB19510.1 approved |
Withstand Voltage |
I/P-O/P:3.75KVac,<5mA 60S |
Isolation Resistance |
I/P-O/P: 500VDC, ≥100M Ω |
Surge |
IEC/EN61000-4-5(L-N:0.5KV, ) |
IEC/EN61000-4-5(L-N:0.5KV, ) |
IEC/EN61000-4-5(L-N:1KV, ) |
EMC Emission |
IEC/EN55015, IEC/EN61000-3-2 |
EMC Immunity |
IEC/EN61000-4-2,3,4,5,6,8,11; IEC/EN61547 |
Other |
Dimension(mm) |
118*44*26mm(L*W*H) |
118*44*26mm(L*W*H) |
138*47*30mm(L*W*H) |
Weight |
0.087Kg |
0.102Kg |
0.147Kg |