This tri-proof light is an ideal alternative to fluorescent lamps and it also has a sustainable design with
multiple plug-in modules. It adopts high lumen SMD LED chip, high transmittance lampshade, and 120
degree wide beam angle provides a uniform light output. It is a splicing design with a waterproof connector.
Four sizes option:600mm/1200mm/1500mm/1800mm.Surface mount and pendant installation available.
For modular design, the led part and driver can be easily replaced, installer can also install the microwave
sensor module and emergency pack easily based on the plug-in design.
Application Areas: It's widely used in factory, warehouses,workshop,ship, parking lot, and other lighting area with high
humidity and dusty places.
Code No | TRP12-600-20W-A4 | TRP12-1200-40W-A4 | IRP12-1500-60W-A4 | TRP12-1800-72W-A4 | |
---|---|---|---|---|---|
Dimension(mm) | 650*89*70 | 260*89*70 | 1560*89*70 | 1824*89*70 | |
Cutout(mm) | |||||
Watt(W) | 20Wmax | 40W@max | 6MNOmay | 72N@ma | |
(optional:18W715W/12W)(optional:35W730W/25W)(optional:55W745W/35W) | (optional:60W/50W/40W) | ||||
Rated Input Voltage(V) | AC220-240V | ||||
Input Voltage(V) | AC198-264V | ||||
IED Module Input | |||||
Light Source | SMD2835 | ||||
SDCM | <6 | ||||
CCT(K) | 1-CCT:3000K/4000K/5000K/5700K||3-CCT:3000K+4000K+5700K | ||||
CCT Selection DIP Switch | Yes | ||||
Non-DIM 1-CCT uminous Flux (lm)±5% | 12W@1440-1530 | 25W@3020-3400 | 35W@4480-4860 | 40W@5000-5200 | |
15W@1780-1900 | 30W@3570-3900 | 45W@5600-607C | 50W@6250-6500 | ||
18W@2140-2260 | 35W@4020-4400 | 55W@6600-7150 | 60W@7500-7800 | ||
20W@2320-2450 | 40W@4720-4900 | 60W@7200-7380 | 72W@8600-9000 | ||
Non-DIM 3-CCT uminous Flux (lm)±5% | 12W@1350-1500 | 25W@3050-3500 30W@3540-3960 | 35W@4440-5040 45W@5580-6390 55W@6650-7350 60W@7300-7500 | 40W@5100-5400 | |
15W@1680-1890 | 35W@4060-4620 | 50W@6350-6600 | |||
18W@1980-2260 | 40W@4620-5120 | ||||
20W@2300-2420 | Q | 0-79 0 | |||
72W@8800-9300 | |||||
CRI | ≥80 | ||||
Beam Angle () | 120° | ||||
IED Driver | Driver built-in | ||||
Dimming Option | DALI/O-10V | ||||
Sensor | Microwave sensor | ||||
Emergency Kits | NO | YES | |||
Electrical Class | Class I | ||||
ingress Protection (IP Rating) | IP65 | ||||
impact Resistance (IK Rating) | K08 | ||||
Product Finishing(Base) | Grey | ||||
Materials of Optics | PC | ||||
Materials of Housing | PC | ||||
Life r) | 50,000h | ||||
Glow wire test (C) | 750℃ | ||||
Operating Temp.(C) | -20C~45 C | ||||
Storage Temp.(C) | -20C~65C | ||||
installation | Surface mount /Pendant |